This wood carving consists of the Crescent Waxing, Full Center, and Crescent Waning Moons linked together. The center Full Moon contains the Celtic Triquetra Knot carved to give a woven appearance.
MEANING: The phases of the Moon (Waxing, Full, and Waning) represent the three aspects of the Goddess and the phases of the Life of Women: Maiden, Mother and Crone.
In the Triquetra Knot, it is believed, to the early Celts, the three arcs represent the three aspects of the ancient Celtic Goddess; Maiden, Mother, Crone. With the circle woven through the three arcs, the “three” are one. The Triquetra is a symbol of protection to modern Wiccans.
Thanks to the TV series, “Charmed,” the triquetra became popular from its use on the cover of the “Book of Shadows”.
This Triple Moon symbol would be a wonderful gift for a Moon following, Triquetra crazy, Wiccan/Pagan loved one!
THE CARVING:
Our carvings are single pieces of western red cedar, designed and carved to be wall hangings. Each carving begins as a 1 X 12 inch cedar board. While we use power tools (Scroll Saw, Rotary shaft Tool, handheld detail sanders etc.), we use no laser’s, CNC machines or computer operated cutting machines. All work is done with our hands and eyes…
We cut the 2 dimensional blanks with scroll and jig saws (double-sized custom orders have to be cut with jigsaw). Carving is done with rotary shaft tools and disc grinders. The 80 grit sanding is the final phase of the carving process, removing the nicks and gouges from the carving tools, and finishes the shaping of the weave. The next 2 sandings with 120 then 220 grit finishes the smoothing and polishing. They are finished with Clear Danish Oil to seal the piece, bringing out the grain and the color.
SIZE: One picture has the piece on a quilting board, lined up on the 1 inch marks. The quilting board, at its simplest, is a one inch grid. So with the piece on the board, you look at the top and follow the line to the left and look at the right side at the widest point and follow the line to the bottom and you have height by width...but wait! It's not that easy! The way this board I have is laid out, if I lined it up on the zero points it would cover up the numbers and on some pieces you wouldn't be able to see them...so, I line it up on the 1 inch marks which means when you get the numbers, you have to subtract 1 inch... TA DA! Measurements may vary slightly from piece to piece.
